|Fig 1: 6210 screen display distortion|
If you have an Ltl Acorn 6210 model camera which suddenly shows a distorted (inverted, sideways shift and/or expanded) screen display as illustrated by figures 1 to 4 then try upgrading to the latest firmware which is available from the manufacturers download page.
If a firmware upgrade does not cure the problem then it is almost certainly being caused by a faulty ribbon cable and/or a faulty display panel PCB. Other symptoms of a faulty ribbon cable may be a white screen, screen not powering up or buttons not working as expected.
The only way to be sure is to dismantle the camera and substitute with a new ribbon cable. If the problem persists then test with a known good test panel (figure 5) if